Filter
Top Products
23
l Gives instant feedback by measuring accurate power output in watts
l Displays your left and right balance as well as the current and average cadence
l Shows how you use force against the pedal with the force vector feature
l Easy to set up and switch between bikes
PAIRING
Sensors compatible with V800 use Bluetooth Smart ® wireless technology. Before taking a new heart rate
sensor, running sensor, cycling sensor or mobile device (smartphone, tablet) into use, it has to be paired with
your V800. Pairing only takes a few seconds, and ensures that your V800 receives signals from your sensors
and devices only, and allows disturbance-free training in a group. Before entering an event or race, make sure
that you do the pairing at home to prevent interference due to data transmission.
PAIR A HEART RATE SENSOR WITH V800
There are two ways to pair a heart rate sensor with your V800:
1. Wear your heart rate sensor, and press START in time view to enter pre-training mode.
2. To pair, touch your sensor with V800 is displayed, touch your heart rate sensor with V800, and
wait for it to be found.
3. The device ID Pair Polar H7xxxxxxxx is displayed. Choose Yes.
4. Pairing completed is shown when you are done.
or
1. Go to General Settings > Pair and sync > Pair other device and press START.
2. V800 starts searching for your heart rate sensor.
3. Once the heart rate sensor is found, the device IDPolar H7xxxxxxxx is displayed.
4. Press START, Pairing is displayed.
5. Pairing completed is displayed when you are done.
When using a H7 heart rate sensor, V800 may detect your heart rate via GymLink transmission before
you have paired it. Make sure you have paired your heart rate sensor before starting training. GymLink
transmission is optimized to be used in swimming, therefore your heart rate is shown in gray in other sport
profiles if you haven't paired your heart rate sensor via Bluetooth®.
PAIR A STRIDE, SPEED OR CADENCE SENSOR WITH V800
Before pairing a stride sensor, cadence sensor or speed sensor, make sure they have been correctly installed.
For more information on installing the sensors see their user manuals.
There are two ways to pair a sensor with your V800: