Filter
Top Products
ASS G
STEP 3 OF 9
FRONT AND REAR SUPPORTS
FiG 3
\
.
.
The screws and washers may be prefitted to the supports.
Tilt the main body (1) backwards and fit the front support (2) onto the main body
(fig 1). The front support faces backwards.
Secure with the four screws and washers provided. Tighten the screws using the
hexagonal key (18) provided.
3. Repeat steps 1 and 2 for the rear support (3) but, at step 1, tilt the main body forwards.
8 OMEGA FITNESS