Filter
Top Products
ASSE LI
STEP 9 OF 9
CONSOLE
FIG 9
%
The screws may be prefitted to the computer.
1. Connect the console cable (A) to the console (9).
2. Position the console (9) carefully onto the bracket on the top of the handlebars post (4) and,
using the multi tool (12) provided, secure with the four screws provided.
3. Plug the pulse sensor cable (B) into the console.
4. Fit the top cover (10) to the underside of the console (9), align the holes and, using the
multi tool (12) provided, secure using two of the four screws provided.
5. Repeat step 4 for the bottom cover (11).
Note " The bottom cover (11) has a larger cutout in order to accommodate the handlebars
tightening bolt.
OMEGA FITNESS 15