NordicTrack 9800 Elliptical Trainer User Manual


 
10
H
OW TO CONNECT THE POWER CORD
This product must be grounded.
If it should mal-
function or break down, grounding provides a path of
l
east resistance for electric current to reduce the risk
o
f electric shock.
N
ote: These instructions describe
how the power cord should be connected in the
UK, Germany, Italy, Spain, or France. To connect
the power cord in other countries, see the instruc-
tion sheet accompanying this manual.
This product is
for use on a dedi-
cated circuit. In
the UK,
Germany, Italy,
Spain, or
France, use a
dedicated 10-
amp, 240-volt
circuit. No other
appliance should
be on the same
circuit. The product is equipped with a cord having an
equipment-grounding conductor and a grounding plug.
Plug one end of the cord into the INCLINE TRAINER
as shown in drawing 1. Attach the cord bracket over
the cord with the included hex key and the two bracket
screws.
Next, plug the grounding plug into a receptacle as
shown in drawing 2 at the right. Do not modify the plug
or the receptacle. Do not use an adapter or an exten
-
sion cord.
HOW TO CONNECT A CATV CABLE
If your INCLINE TRAINER has the Workout TV con-
sole, a CATV cable must be connected to the IN-
CLINE TRAINER for cable TV stations to be viewed.
Locate the cable
jack on the front of
the INCLINE
TRAINER.
Connect the CATV
cable to the cable
jack using the PAL
adapter. Route the
cable so that it will
not be pinched or
crushed by the wheels when the incline is changed.
A satellite receiver, VCR, or DVD player can also be
connected to the INCLINE TRAINER. Connect a CATV
cable from the coaxial output on your equipment (usu
-
ally labeled TV OUT or RF OUT) to the cable jack on
the front of the INCLINE TRAINER.
Note: Audio/video equipment without coaxial outputs
(some satellite receivers and DVD players) requires a RF
modulator to work correctly with the INCLINE TRAINER.
RF modulators are not available from FreeMotion
Fitness, but are available at electronics stores. See the
owner's manual for the equipment you wish to connect to
determine if an RF modulator is needed
, or contact your
local audio/visual service provider.
DANGER:Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service
-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. Do not use
an adapter to connect the plug to an improper
receptacle.
HOW TO CONNECT THE INCLINE TRAINER
1
Cord
Cord
Bracket
Bracket
Screws
Cable Jack
IT
GR
FR/SP
IT
GR
IT
GR
FR/SP
UK
JP
IT
Germany
F
rance
Spain
Italy
2
UK