Nike + SPORTBAND Fitness Equipment User Manual


  Open as PDF
of 32
 
19
The Nike+ SportBand User’s Guide
After Your Run
Reviewing Your Runs
The Review loop that happens after a run
endsontheTIMEscreen,showingyouthe
currenttimeofday.PresstheTogglebutton
(ontheside)toseeagainareviewofyour
LAST run (the loop will play twice then stop
atyourdistance).PressToggleagaintosee
your weekly miles or kilometers (Sunday at
12:00amtoSaturdayat11:59pm).Pushthe
Toggle button one more time to see the total
miles recorded on your SportBand. One more
push of the Toggle button will take you back
to the time of day. (fig.31)
1. Fromthecurrenttimedisplay,pressthe
Togglebutton(ontheside)oncetoreview
your last run. The word LAST will appear,
followed by your most recent run info:
distance, pace, time, then calories burned.
Itcyclesthroughtheserunmetricstwice,
then stops at distance. (fig.32)
2. Toreviewthedistanceyou’veruninthe
pastweek(Sundayat12:01amtoSunday
at12:00am),presstheTogglebutton(onthe
side)again.ThewordWEEKappears,followed
by your distance. (in miles or kilometers, fig. 33)
3. To review the total number of miles recorded,
press the Toggle button one more time. The
letters TOTL, short for total, appears, followed
by your total miles or kilometers recorded with
the SportBand so far. (fig.34)
ViewingtheCurrentTime
The SportBand also functions as watch.
PresstheTogglebutton(ontheside)tocycle
through the three review screens of your
workouts until you get to the current time.
Note: To make adjustments to the time, refer
to the User tab settings in the Nike+ Utility.
fig.31
fig.32
fig.33
fig.34
toggle
weekly
distance
total
distance
x2, loops twice
 previous next