Nike + SPORTBAND Fitness Equipment User Manual


  Open as PDF
of 32
 
6
The Nike+ SportBand User’s Guide
Step 3: Go for a run.
1. InsertthesensorinyourNike+ready
shoe. Lift the insole of the left shoe,
remove the foam insert from the pocket
underneath, and replace it with the
sensor, flat side up. (fig.4)
2. RemovetheSportBandLinkfromyour
computer and place it back in your band.
3. To activate the sensor, start walking,
and press and hold the Record button
on the top of the SportBand for 3
seconds. (fig.5) When connected, the
shoe icon will appear and the numbers will
blink. Now you’re ready to start recording.
4. Beginyourrun.PresstheRecordbutton
(onthetop)oncetostartrecording.(fig.6)
5. PresstheRecordbuttonagaintopause
yourworkout.Pressitagaintoresume.
6. UsetheTogglebutton(ontheside)to
seeyourdistance,pace,time(chrono)
and calories burned while you run. (fig.7)
7. To stop recording your run, simply
press and hold the Record button
for 3 seconds. (fig.8)
Step4:Uploadyourrunstonikeplus.com
After recording your run or runs, plug
the SportBand Link back into the USB
port on your computer to recharge the
battery and upload your runs to
nikeplus.com. (fig.9)
fig.4
fig.5
fig.6
fig.7
fig.8fig.9
1 sec
 previous next