12
Magnetic Safety Stop Deactivation
To deactivate the Magnetic Safety Stop and permit unrestricted access of the
TreadClimber
®
exercise machine follow the steps below.
Step 1: With the magnet key in place and the display at the opening message,
“SELECT WORKOUT”, or, if the magnet key is removed and the display
reads, “REPLACE MAGNET”, press [Speed UP], [3], [ENTER]. The display
will read “CUSTOMIZE”. Use the [Speed UP] or [Speed DOWN] keys to
scroll through the options until the console displays “ENABLE MAGKEY”.
Step 2: Press [ENTER], and the display will either read “ON” or “OFF”. Press
[Speed UP] or [Speed DOWN] to toggle between “ON” and “OFF.” With
“OFF” displayed, press [ENTER] to select “OFF.”
Step 3: The display will show “CUSTOMIZE”. Press “CLEAR” and the Magnet
Safety Stop is deactivated, until the magnet is placed back into its
designated area.
IMPORTANT: If at any time the safety key is put back in place THE SAFETY CORD
FEATURE REACTIVATES AUTOMATICALLY and must be turned off
again using the above steps.
Magnetic Safety Key
NAUTILUS
®
TREADCLIMBER
®
OPERATION