Filter
Top Products
1 - 10
USB PC or Macintosh
®
Keyboard
Scan one of the following codes to program the imager for USB PC Keyboard or
USB Macintosh Keyboard. Scanning these codes adds a CR and selects the
terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard - 125).
USB HID
Scan the following code to program the imager for USB HID bar code imagers.
Scanning this code changes the terminal ID to 131.
USB COM Port Emulation
Scan the following code to program the imager to emulate a regular RS-232-
based COM port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Honeywell website (
www.honeywellaidc.com). The
driver will use the next available COM port number. Apple® Macintosh comput-
ers recognize the imager as a USB CDC class device and automatically use a
class driver. Scanning the code below changes the terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
USB Keyboard (PC)
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Imager
USB COM Port Emulation