Filter
Top Products
8
6. Attach the Butterfly Upright (3) to the Short Base
(2) with the two indicated M10 x 65mm Carriage
Bolts (110) and two M10 Nylon Locknuts (87). Do
not tighten the Locknuts yet.
Attach the Seat Leg (9) to the Short Base (2) with
the two indicated M10 x 65mm Carriage Bolts
(110) and two M10 Nylon Locknuts (87). Do not
tighten the Locknuts yet.
Attach the Leg Lever Bumper (77) to the Seat
Leg (9) with an M4 Washer (142) and an M4 x
20mm Self-tapping Screw (14).
7. Orient the Seat Frame (8) as shown. Attach the
Seat Frame between the Butterfly Upright (3) and
the Seat Leg (9) with four M10 x 95mm Bolts
(92), four M10 Washers (91), and four M10 Nylon
Locknuts (87). Do not tighten the Locknuts yet.
6
7
3
9
9
3
2
87
87
87
142
77
14
87
110
110
8
87
87
91
87
91
92
91
87
91
92