Filter
Top Products
44 350A HOME ARC TRAINER
Copyright 2005 Greenmaster Industrial Corp. All rights reserved.
TROUBLESHOOTING
Troubleshooting
NOTE: Do not touch any internal electric wires. Contact Cybex Customer Service for a list of certified Cybex Service Technicians
in your area.
Home Arc Trainer will not start:
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet and
the surge protector is turned on (refer to the Power Requirements section in this manual).
2. Check the circuit breaker reset switch located on the front of the Home Arc Trainer. Turn the power off, wait 5 minutes then
press the rest switch.
3. Check the house electrical breaker box and the circuit breaker for the room the Home Arc Trainer is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
4. Have an electrician check for inadequate voltage at the outlet.
Home Arc Trainer looses power during use:
1. Check the circuit breaker reset switch located on the front of the Home Arc Trainer. Turn the power off, wait 5 minutes then
press the rest switch.
2. Check the house electrical breaker box and the circuit breaker for the room the Home Arc Trainer is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
Contacting Customer Service:
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time.
For customers living in the USA, contact Cybex Customer Service at 888-462-9239.
For customers living outside he USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183.
Order parts and find information on the web at for by e-mail at techhelp@cybexintl.com.