Filter
Top Products
4 350A HOME ARC TRAINER
PREASSEMBLY
Open the boxes:
As you open each box, take inventory of all items contained inside the box. Use the “Content Checklist” and “Hardware Comparison
Chart” located on the following pages to assist you in taking inventory of each box. If you are missing any parts or have any
assembly questions call your local Cybex Retailer or Cybex Customer Service 1-888-462-9239.
Gather your tools:
Before starting the assembly, gather all the necessary tools you need to assemble the unit properly.
Clear your work area:
Make sure that your work area is free and clear from all objects that may cause injury during assembly. After the unit is fully
assembled, allow enough clearance for safe access and operation.
Invite a friend:
For assembly steps that require heavy lifting, use a minimum of two people to lift, move and assemble this unit.
User Weight Limitation:
Do not use this unit if you weigh more than 300 lbs (135 kg). This is the rated maximum user weight. Serious injury may
occur if the user’s weight exceeds 300 lbs (135 kg).
Care and maintenance:
1. The safety level of the Home Arc Trainer can be maintained only if it is examined regularly for damage and wear.
2. Replace defective components immediately and stop the use of the equipment until it is repaired.
3. Always be careful when mounting or dismounting the equipment. Use the handles to steady yourself before starting your
workout. Dismount from the equipment only after you have come to a complete stop.
4. Always check your Home Arc Trainer for any worn parts or torn or damaged labels. If any parts are broken or labels missing,
please call Cybex Customer Service.
Cleaning Your Home Arc Trainer:
After each use:
1. Wipe up any liquid spills immediately.
2. Use a cloth to wipe up any remaining perspiration from the handles and painted surfaces.
As Needed:
1. Clean your unit using a spray a mild cleaning agent, such as a water and dish soap solution, on a clean cloth first and then
wipe the unit with a damp cloth. NOTE: Do not spray cleaning solution directly on the unit. Direct spraying could cause
damage to the electronics and may void the warranty.
2. Vacuum any dust or dirt that might accumulate under or around the unit.
Heart Rate Grips
Contaminants, such as hand lotions, oils or body powder may come off on the contact heart rate grips. These can reduce sensitivity
and interfere with the heart rate signal. It is recommended that you use clean hands when using the contact heart rate. Clean the
heart rate grips periodically as noted below.
1. Clean heart rate grips using a cloth dampened with a cleaning solution containing alcohol. The grips are the only part of the
unit you should use a cleaning solution containing alcohol.