Filter
Top Products
A 6 A 7
STOP
SIGNAL
/
LIGHT
RESET
OK
Signal/ Light Turns the beep on or off.
Turns the backlight on.
Reset Resets the heart rate monitor.
Stop Return - Stops measuring the heart rate.
Exits the displayed mode and returns to
the previous mode level.
Returns to the Time of Day display
from any mode by pressing and
holding the stop button.
OK Accept - Starts measuring the heart rate (start).
Enters the displayed mode shown on
the lower level (start). Locks in your
selection (ok). Records lap information
(lap). The Help text (start, ok or lap)
that appears on the display above the
button indicates its use.
Useful Tips
• Briefly pressing a button (approximately 1 second) will do different
things than pressing and holding the button for a longer period of
time (approximately 2 to 5 seconds). If your press the button for a
longer period of time, you can use shortcuts.
• The buttons are slightly stiffer than those of an ordinary watch to
prevent them from being pressed accidentally.
• You can always return to the Time of Day display from the Options
setting or File recalling loops by pressing and holding the stop button.
• See the glossary for display symbols and text interpretation.
Up Moves to the following
mode. Increases the
selected value.
Down Returns to the previous
mode. Decreases the
selected value.
Buttons and Their Functions
S810i manual USA GBR A.pm6 29.7.2002, 14:146-7