Filter
Top Products
C 43C 42
Receiver automatically stores a lap time when you stop recording an
exercise. You can store 99 laps if you have not used the profile
function. After storing 99 laps FULL appears for a few seconds every
time you take a lap. You can continue taking laps but they will not be
recorded. The wrist receiver continues recording all other information
of the exercise, except lap and Profile information.
Pausing the Exercise
Press the stop button.
The exercise recording, stopwatch and other calculations are paused. To
continue them, press OK. Or, to return to the Time of Day display, press and
hold the stop button.
The receiver automatically returns to the Time of Day display within
5 minutes if you forget to quit the heart rate measuring after having
stopped the stopwatch and taken the transmitter off your chest.
Swapping the Displayed Exercise Information
There are three display options, which you can swap between by pressing
the down button. The receiver saves the upper and lower row settings for
the three display options. If the Help function is on, the name of the
selected function appears for a few seconds.
Time of Day Time of Day Stopwatch
Stopwatch Lap time Time of Day
Current
heart rate
Number of the lap
You have three optional Exercise modes depending on the selected
exercise:
• BasicUse (E0)
• BasicSet (E8)
• Profiles (E1-E7)
The following functions can be used during all three optional Exercise modes.
Illuminating the Display
Press the signal/light button.
After you use backlight once in the Measure mode, the receiver
automatically illuminates the display when you start /stop the exercise
session, store lap information end an interval and recovery calculation.
Storing Lap and Split Time
Press OK to store lap and split time.
First Then
Lap time Split time
Average heart
rate of the lap
Number of
the lap
S810i manual USA GBR A.pm6 29.7.2002, 14:1442-43