Filter
Top Products
2.11 Speed Limits
MINIMUM and MAXIMUM speeds can be set into the treadmill.
To select this option: Enter into the Settings menu, see Section 2.1.
1. Select the SPEED LIMITS option, and press the JustGo
TM
/ENTER key
to accept.
2. Select the MINIMUM OR MAXIMUM value with the ELEVATION INCREASE AND ELEVATION DECREASE keys. To modify
the value, use the SPEED INCREASE OR DECREASE keys. Press the JustGo/Enter key to accept (the values will not be
considered if you don’t press the ENTER key to accept).
Please refer to the following values to know the possible range of values.
2.12 Pause Time
To modify the pause time: Enter into the Settings menu, see Section 2.1.
1. Select the PAUSE TIME option, and press the JustGo
TM
/ENTER key to accept.
2. Select from 1 to 5 minute pause times. Press the INCREASE or DECREASE keys to select the pause time.
3. Press the JustGo
TM
/ENTER key to accept.
2.13 Big Number Option
The big number option allows you to display LARGE numbers on the main screen. Profile will not be shown in this mode.
The big number option can be activated or deactivated. While in this option, you can select 7 different ways of display.
To select a big number option: Enter into the Setting menu, see section 2.1.
1. Select the BIG NUMBER OPTION, and press the JustGo
TM
/ENTER key to accept.
2. Select the option you wish to be displayed on the screen. Choose from, NONE, All, Speed, Distance, Calories, Time or
Heart Rate. Press the INCREASE or DECREASE key to select the option.
3. Press the JustGo
TM
/ENTER key to accept.
From now on, all the information will be displayed on screen as the option you selected.
NOTE – All the programs will be displayed in Big Numbers except for the Track and the Runner’s Interval program.
2.14 Edit Text Feature
The Edit Text feature allows the owner or users of the treadmills to modify the welcome message displayed on the main
computer display screen.
There is a standard welcome message entered in your T360-T560. This message is displayed in the language of your choice
previously selected (refer to section 2.2). If the standard message is modified, it will only be displayed in the language you
entered.
To activate the Edit Texte feature: Enter into the Settings menu, see section 2.1.
1. Select the EDIT TEXT option, and press the JustGo
TM
/ENTER key to accept.
To modify the welcome message, you will need to enter the letters and characters one by one. A total of 200 alpha-
numeric characters can be saved.
2. Use the INCREASE or DECREASE keys to select any letter from A to Z or number from 0 to 9 as the first character. If you
wish to leave a space between characters, select SPACE (blank character) between the 9 and the A characters. Press the
ELEVATION INCREASE key to accept this character. Now the second character must be selected. Repeat this procedure
until you have entered the new welcome message. If you wish to modify a character before all 200 spaces are accepted,
press the ELEVATION DECREASE key to backspace.
3. Once all letters and characters of your message are entered, press SAVE on the informational window to save your
message.
From now on, your new welcome message will be displayed on the introduction screen.
14
Minimum: 0.5 MPH(0.8 KM/H)
Maximum: 12 MPH (19.50 KM/H)
Default: 0.5 to 12 MPH (0.8 to 19.50 KM/H)