Filter
Top Products
From now on, the warm up or cool down option will be in the selected mode.
NOTE – If you wish to cancel the warm up or cool down while you perform it, simply press the CLEAR/STOP key to interrupt
the feature.
2.6 Heart Rate Control Options Feature
The heart rate control feature lets you choose from three different operating modes. The first mode is “SPEED AND
ELEVATION MODE”. In this mode, the machine will bring you to your target heart rate by doing changes in speed and
elevation, but you can make your own changes at anytime. The second mode is “SPEED MODE”. In this mode, the machine
will bring you to your target heart rate by changing the speed but it will let you do any change manually at any time. The
computer will adjust the speed to keep you in your target heart rate. The third mode is “ELEVATION MODE”. In this mode,
the machine will bring you to your target heart rate by changing the elevation but it will let you do any change manually
at any time. The computer will adjust the elevation to keep you in your target heart rate. Note that the default mode is
“SPEED AND ELEVATION MODE”.
To select the mode you want to choose: Enter into the Settings menu, see Section 2.1.
1. Select HEART RATE CONTROL option and press the JustGo
TM
/ENTER key to accept.
2. Press the INCREASE or DECREASE keys to select the mode you want to choose and press the JustGo
TM
/ENTER key to
accept. The computer will indicate to you the mode you have just chosen and it will be active from now on.
2.7 Beeper Feature
The beeper can be activated or deactivated.
To activate or deactivate the beeper:
1. Enter into the Settings menu, see Section 2.1.
2. Select the BEEPER option, and press the JustGo
TM
/ENTER key to accept.
3. Select the mode in which you wish the beeper to be. Choose ON or OFF with the SPEED keys and press JustGo
TM
/ENTER
key to accept.
From now on, the beeper will be in the selected mode.
2.8 Heart Rate Access Options Feature
The Heart Rate Access Options feature lets you choose from two different operating modes. The first mode is “SPEED
MODE”. In this mode, the machine will bring you to your target heart rate by changing the speed but it will let you do any
change manually at any time. The computer will adjust the speed to keep you in your target heart rate. The second mode
is “ELEVATION MODE”. In this mode, the machine will bring you to your target heart rate by changing the elevation but it
will let you do any change manually at any time. The computer will adjust the elevation to keep you in your target heart
rate. Note that the default mode is “SPEED MODE”.
To select the mode you want to choose: Enter into the Settings menu, see Section 2.1.
1. Select HEART RATE ACCESS OPTIONS and press the JustGo
TM
/ENTER key to accept.
2. Choose from ON or OFF. Press the speed INCREASE or DECREASE to choose and press the JustGo
TM
/ENTER key to accept.
3. Press the INCREASE or DECREASE keys to select the mode you want to choose and press the JustGo
TM
/ENTER key to
accept. The computer will indicate to you the mode you have just chosen and it will be active from now on.
NOTE – The default setting of this option is OFF.
11