A SERVICE OF

logo

Open as PDF
next previous
TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 23 -
Figure 3-18 AP List
3. Click the Next button in Figure 3-19. You will then see the Fin
ish page. Click the Reboot
button to make your wireless configuration take effect and finish the Quick Setup.
Figure 3-19 Quick Setup - Finish
3.2.5 WISP Client Router Mode
When you choose WISP Client Router Mode on Working Mode page in Figure 3-5 , take the
following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-20.
Figure 3-20 Quick Setup – WAN Connection Type
The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the
Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure
the cable is securely plugged into the WAN port before detection.