TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 6 -
2.3.1 Wireless Router Mode
As a wireless router, TL-WR710N enables multi-user to share Internet via DSL/Cable Modem.
The default mode of TL-WR710N is Wireless Router. On this mode, the wired port LAN/WAN
works as WAN, it can be connected to DSL Modem or directly connected to a wired network with
an Ethernet cable. Computers could connect to the device by both wired way through the wired
port LAN and wireless way.
Figure 2-1 Hardware Installation of the TL-WR710N in Router Mode
1. Connect the LAN/WAN port of TL-WR710N to the LAN Port on the DSL/Cable Modem.
2. Connect the WAN port on the DSL/Cable Modem to the wired Internet.
3. Plug the power plug of TL-WR710N in electrical wall socket.
4. Power on the DSL/Cable Modem, PC(s) and notebook(s).
2.3.2 Access Point Mode
As the supplement of wired LAN, TL-WR710N enables the wired LAN to connect to the Internet
wirelessly.
Plug the power plug of TL-WR710N in electrical wall socket and connect the Ethernet cable
correctly, you can surf the Internet by connecting your PC(s) to the Router wirelessly.
On this mode, the wired port LAN/WAN works as LAN. Computer could connect to the device by
either wired or wireless way. The Pre-encryption function is opened by default and the default
password is the last unique eight numbers of each Router’s MAC address.
