A SERVICE OF

logo

Open as PDF
next previous
TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 109 -
Step 2: For the configuration of the wireless adapter, please choose “Enter the PIN of my
access point or wireless router” in the configuration utility of the WPS as below, and
enter the PIN code of the AP into the field after “Access Point PIN”. Then click Connect.
The WPS Configuration Screen of Wireless Adapter
)
Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as
Figure 5-3.
Y
ou will see the following screen when the new device has successfully connected to the network.
Figure 5-6
)
Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.