A SERVICE OF

logo

TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 7 -
Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode
1. Connect the LAN or LAN/WAN port of TL-WR710N to the wired network port with an Ethernet
cable.
2. Plug the power plug of TL-WR710N in electrical wall socket.
3. Power on the PC(s) and notebook(s).
2.3.3 Repeater Mode
TL-WR710N is used to extend the range of wireless signal of the existing AP or wireless router.
On this mode, the wired port LAN/WAN works as LAN. Computer could connect to the device by
either wired or wireless way. The SSID of TL-WR710N should be the same as that of the device
you repeat.
Figure 2-3 Hardware Installation of the TL-WR710N in Repeater Mode
1. Plug the power plug of TL-WR710N in electrical wall socket.