TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 192 -
¾ WISP Client Router - In this mode, the device enables multiple users to share Internet
connection from WISP.
8.5 Network
Figure 8-4 The Network menu
There are three submenus under the Network menu (shown in Figure 8-4): WAN, MAC Clone
and LAN. Click any of them, and you will be able to configure the corresponding function.
8.5.1 WAN
Choose menu “Network → WAN”, and then you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will
automatically get IP parameters from your ISP. You can see the page as follow (Figure 8-5):
Figure 8-5 WAN – Dynamic IP
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP
parameters from your ISP. Click the Release button to release the IP parameters.
