TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 21 -
¾ Wireless Password - If the AP your router is going to connect need password, you
need to fill the password in this blank.
2. Click Survey button on the Wireless page as shown in Figure 3-14, and then AP List page will
appe
ar as shown in Figure 3-15. Find the SSID of the Access Point you w
ant to access, and
click Connect in the corresponding row. For example, the third item is selected. The target
network’s SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-14.
Figure 3-15 AP List
) Note:
If you know the SSID of the desired AP, you can also input it into the field "SSID" manually.
3. Click the Next button in Figure 3-14. You will then see the Fin
ish page.
Because something has changed on the Wireless Repeater page, you will see the Finish
page as shown in Figure 3-16. Click the Reboot b
utton to make your wireless configuration
take effect and finish the Quick Setup.
Figure 3-16 Quick Setup - Finish
3.2.4 Client Mode
When you choose Client on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then W
ireless Client page will appear as shown in Figure 3-17.
