NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
7-10 Additional System Configuration
v2.0, May 2007
• If you selected Use default NTP servers, NETGEAR’s primary and secondary NTP
servers for your time zone will appear.
• If you selected Use custom NTP servers, enter an NTP server IP address or fully-qualified
domain name (FQDN) in the address fields. (For redundancy, enter a backup custom
server address in the Secondary Server Name and IP Address fields.)
6. Click Apply to update the configuration.
If you enabled NTP, then the NTP time settings will override the manually configured time
settings. The NTP time settings will be determined by the NTP server and the time zone that is
selected in the Select Your Time Zone menu.
System Configuration Utilities
The Utilities menu allows you to
• export the configuration file
• import a saved configuration file
• upgrade the SSL VPN Concentrator software
• restore the settings to factory defaults
• restart the SSL VPN Concentrator
In addition, the menu allows users to encrypt the configuration files.
To access the SSL VPN Concentrator software and system settings, click Utilities under the
System Configuration menu in the left navigation pane. The Utilities menu will display.
Note: If you select the default NTP servers or if you enter a custom server FQDN, the
SSL VPN Concentrator must determine the IP address of the NTP server by a
DNS lookup. You must configure a DNS server address in the Network menu
before the SSL VPN Concentrator can perform this lookup.
