A SERVICE OF

logo

Open as PDF
next previous
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
4-22 Setting Up User and Group Access Policies
v2.0, May 2007
.
2. From the Object Type pull-down menu under Add Resource Addresses, select either IP
Address or IP Network:
• If you selected IP Address, enter an IP address or fully qualified domain name in the IP
Address/Name field.
• If you selected IP Network, enter the IP network address in the Network Address field.
Enter the mask length in the Mask Length (0-31) field.
• Enter the Port Range or Port Number for the IP Address or IP Network you selected.
3. Click Add Resource to add the IP address or IP network to the Network Resource. The new
configuration appears in the Defined Resource Addresses table, as shown in the example
below.
Figure 4-20
Note: Only default ports are allowed for Terminal Services, FTP and CIFS. An
Administrator cannot configure user desired ports for these services.