Default Settings and Technical Specifications A-1
v2.0, May 2007
Appendix A
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
SSL VPN Concentrator 25 SSL312.
Factory Default Settings
You can use the push button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the Factory Defaults button for approximately 5
seconds, until the TEST light turns on. Your device will return to the factory configuration
settings shown in Table A-1 below.
Table A-1. SSL312 Default Configuration Settings
Feature Description
Management Login
User Login URL 192.168.1.1
User Name (case sensitive) admin
Login Password (case sensitive) password
Ethernet Port 1
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Port Speed 10/100
Gateway Address 0.0.0.0
Ethernet Port 2
IP Address 10.0.0.1
Subnet Mask 255.0.0.0
Port Speed 10/100
Gateway Address 0.0.0.0
