A SERVICE OF

logo

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
6-4 Configuring the SSL VPN Tunnel Client and Port Forwarding
v2.0, May 2007
6. Restart the SSL VPN Concentrator software if any VPN Tunnel Clients are actively
connected. Restarting will force the clients to obtain a new virtual IP address.
VPN Tunnel Clients are now able to connect to the SSL VPN Concentrator and receive a
dynamic IP address in the client address range.
.
Adding Routes for VPN Tunnel Clients
The VPN Tunnel Clients assume that the following networks are located across the VPN over SSL
tunnel:
The subnet containing the client IP address (PPP interface), as determined by the class of the
address (Class A, B, or C).
Subnets specified in the Configured Client Routes table.
Note: Be sure to configure DNS addresses in the Network menu.
Figure 6-1