15
Basic Operations
Adjusting Image Quality
The quality of the screen image can be adjusted as described in the following sections.
When you attach the EPSON cinema filter to the projector and set the EPSON Cinema Filter command to
ON, the images are adjusted to the optimum tint for movie theater images.
If you do this when a computer is connected and the projector is being used for a presentation, the image will
appear darker than normal, so remove the cinema filter and change the EPSON Cinema Filter setting to OFF.
Procedure
1
Attach the cinema filter.
Align the nub on the focus ring with the notch in
the cinema filter, and then attach the cinema
filter.
2
Press the [Menu] button on the remote
control, and then select EPSON Cinema
Filter from the Video menu.
For details on this operation, refer to “Using the
Configuration Menus.” (p.29)
3
Select ON and then press the [Enter] button.
4
After changing the setting, press the [Menu] button to exit the configuration
menu.
Using the EPSON Cinema Filter
Nub
•
The EPSON cinema filter should always be installed so that the notch is aligned
with the nub on the focus ring. If the cinema filter is not installed correctly,
unevenness or lack of focus may occur in the projected image.
•
Do not touch the glass surfaces of the cinema filter or the projector's lens when
attaching the cinema filter. If fingerprints or smears get on the glass surfaces, it
will reduce the clarity of the projection.
Video
Audio
Setting
Advanced
About
Reset All
EPSON Cinema Filter :
ON OFF
: Return : Select
/
: Set
Video Signal
Color Mode
Select [Theatre ]
Position
Adjust
Brightness
Contrast
0
0
Color 0
Tint
Sharpness 0
Aspect Ratio
Reset
Execute
+
-
+
-
0
+
-
Select [Auto ]
4: 3 16: 9
+
-
+
-
:
:
:
:
:
:
