Avoiding Memory Manager Conflicts A-3
6 Select Configuration/Diagnostic/Troubleshooting on the
main menu.
7 Select Adapter Information under the View menu item to
view the adapter’s base memory addresses.
The MMIO address and the Shared RAM base address are the
memory addresses that the adapter is using.
8 Write down the memory ranges that the 3C689 adapter is
using.
For example, the MMIO base address = CC000H, the Shared
RAM address = D0000H, and the Shared RAM Page Size = 16 KB.
9 Exit the Configuration and Diagnostic Program and remove
the diskette.
10 Edit the CONFIG.SYS file again.
a Remove the REM command you added in step 2.
b Modify the startup command line to exclude the memory
range that the 3C689 adapter is using. For example, type:
device=c:\windows\emm386.exe x=CC000-C7FFF noems
where x stands for exclude, followed by the memory range.
Refer to the manual that accompanied the memory manager
software for additional instructions and information.
11 Save the CONFIG.SYS file and exit the text editor.
12 Reboot the computer.
This completes the procedure for avoiding conflicts with a
memory manager.
