Installing the NDIS 2.01 Driver 5-9
Substitute the actual DOS PROTOCOL driver name, if
appropriate, for PROTOCOLDRIVER.DOS.
This completes the NDIS driver installation sample procedure.
Using the 3C689 Adapter with Windows for Workgroups
The TokenDisk diskette contains a subdirectory structure and
files that make it an OEM import disk for Microsoft Windows
for Workgroups (WFW). Run the configuration portion of the
Configuration and Diagnostic Program before you start this
procedure.
To import the driver during installation of Windows for
Workgroups, follow these steps:
1 Insert Microsoft’s Setup disk 1 in the diskette drive and
make that drive the active drive. For example, type:
A: [Enter]
2 Execute the WFW setup program. Type:
setup [Enter]
3 Follow the instructions on the screen.
4 When prompted, enter the target drive and directory
where WFW is to be installed. For example, type:
C:\WINDOWS
5 From the Network setup dialog box, select the Networks...
box.
6 Select Install Microsoft Windows Network and the <OK>
button.
7 From the Network window select the Drivers... box.
8 In the Network Adapters dialog box, select the
<Add Adapter> button.
