Changing Configuration Settings 4-5
Changing Configuration Settings
To manually change the configuration settings, follow
these steps:
If you have loaded Card and Socket Services, you will not be able
to change Interrupt Request Level, MMIO Base Address, and
CIS Memory as Card Services manages these values for you.
1 Select the Configuration/Diagnostic/Troubleshooting
option on the main menu, shown in Figure 4-2.
Press [Enter].
2 On the Configuration and Diagnostic menu, select
Configuration and Diagnostic Program.
A screen identifying the adapter appears.
3 The menu item Configure Adapter appears already
highlighted. Press [Enter].
The configuration information for the selected adapter
appears on a screen similar to that shown in Figure 4-3.
The I/O Base Address parameter is automatically highlighted.
Figure 4-3 Adapter Configuration Screen
Configuration and Diagnostic Program
InstallQuit View Select
Adapter Configuration
F1=Help
[ENTER]=Change the Setting
[
-¯
]=Scroll
[Alt]=<Highlighted Key>=Execute Function
Test
CancelOKModify File Options
TokenLink III Adapter Configuration
I/O Base Address
Interrupt Request Level
Ring Speed
MMIO Base Address
Shared RAM Address Range
(Primary)
3
16 Mbps
CC000h
D0000h - DBFFFh
