Installing the Novell NetWare DOS ODI Driver 5-5
You may also need the files NETBIOS.EXE and INT2F.COM if
you are running full NetBIOS applications. Check with the
vendor of your application.
3 If you have not already done so, copy the 3Com NetWare
adapter driver (3C689.COM) to your computer’s hard drive.
The NetWare client drivers are located in the \NETWARE\ODI
subdirectory on the TokenDisk diskette.
4 Modify the AUTOEXEC.BAT file to include the following
commands:
LSL
3C689
IPXODI
VLM
H:
LOGIN
If you are using the Compaq Concerto computer, you need to
specify a drive other than F here and in the CONFIG.SYS file.
This computer uses the F drive as the RAM disk.
5 Edit the NET.CFG file and include the text from the
NET.PCM file after the LINK DRIVER 3C689 statement.
■ If you are not using Card Services, your NET.CFG file
should look similar to the following:
LINK DRIVER 3C689
PRIMARY
INT 3
MEM #1 CC000
MEM #2 D0000 400
DATA RATE 16
■ If you are using Card Services, your NET.CFG file should
look similar to the following:
LINK DRIVER 3C689
DATA RATE 16
