Filter
Top Products
23. Attach the Backrest Cap (40) to the Backrest
Frame (17) with two M4 x 16mm Self-tapping
Screws (104).
Attach a Bumper (168) to the Backrest Frame
(!7) with an M4 x 16mm Self-tapping Screw (!04)
and an M4 Washer (157).
Attach the Right Pinch Guard (42) to the Backrest
Frame (17) with two M4 x 9mm Self4apping
Screws (106). Attach the Left Pinch Guard (41)
in the same manner.
24. Attach the Backrest (24) to the Backrest Frame
(17) with four M6 x 38ram Screws (128) and four
M6 Washers (!26).
25. Insert the rod on the Backrest Frame (17) into the
slot in the Seat Carriage (!6). Hold the Backrest
Frame vertically over the Seat Carriage and
slide the rod into the slot, as shown in the
inset drawing.
23
24
25
104
%
168
_.104
157
106
4!
126
14