Filter
Top Products
TL-R4299G Dual-WAN SMB Broadband Router User Guide
54
4.9.1 QoS Settings
Choose menu “QoS→QoS Settings”, you can configure the Upload Bandwidth and Download
Bandwidth in the next screen, their value you configure should be less than 1000000Kbps.
Figure 4-48
4.9.2 QoS Rules List
Choose menu “QoS→QoS Rules List”, you can view and configure the QoS rules in the screen
below.
Figure 4-49
¾ Description - This is the information about the rules such as address range.
¾ Mode - Mode can be separated into “independent bandwidth” and “share bandwidth”.
Independent bandwidth means every port has its own upload and download bandwidth,
share bandwidth means address or port share upload and download bandwidth.
¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
¾ Enable - This displays the status of the rule.
¾ Modify - Click “Modify” to edit the rule, click “Delete” to delete the rule.
To add/modify a QoS rule:
Step 1: Click Add New…/Modify shown in Figure 4-49, you will see a new screen shown in
Figure 4-50.
Step 2: Enter the information like the screen shown b
elow.