Filter
Top Products
TL-R4299G Dual-WAN SMB Broadband Router User Guide
51
Figure 4-41
¾ Destination IP Address - The “Destination IP Address” is the address of the network or host
that you want to assign to a static route.
¾ Subnet Mask - The “Subnet Mask” determines which portion of an IP address is the network
portion, and which portion is the host portion.
¾ Default Gateway - This is the IP address of the gateway device that allows for contact
between the router and the network or host.
¾ Status - This field displays the status, Enabled means the rule is effective, Disabled means
the rule is ineffective.
To add/modify a static routing entry:
Step 1: Click Add New…/Modify shown in Figure 4-41, you will see a new screen shown in
Figure 4-42.
Step 2: Enter the appropriate Destination IP
Address, Subnet Mask and Default Gateway, and
then select the status.
Figure 4-42
Step 3: Click Save to make the entry take effect.
)
Note:
If you want to add more than one static route, please go to step 1 to continue.
Other configurations for the entries as shown in Figure 4-31: