TP-Link TL-R4299G Bicycle User Manual


 
TL-R4299G Dual-WAN SMB Broadband Router User Guide
19
Figure 4-7
¾ MTU Size- The default MTU size is 1492 bytes, which is usually fine. For some ISPs, you
need modify the MTU. This should not be done unless you are sure it is necessary for your
ISP.
¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should
not be configured unless you are sure it is necessary for your ISP.
¾ ISP Specified IP Address - If you know that your ISP does not automatically transmit your IP
address to the router during login, select Use IP Address specified by ISP and enter the IP
address in dotted-decimal notation, which your ISP provided.
¾ Detect Online Interval - The default value is 0, you can input the value between 0 and 120.
The router will detect Access Concentrator online at every interval between the time. If the
value is 0, it means the Router does not detect.
¾ Primary DNS & Secondary DNS - If you know that your ISP does not automatically transmit
DNS addresses to the router during login, select Use the following DNS servers and enter
the address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary DNS
server address is available, enter it as well.
¾ Ingress Bandwidth: Enter the bandwidth for download traffic.
¾ Egress Bandwidth: Enter the bandwidth for upload traffic.