PYLE Audio PHRM20 Heart Rate Monitor User Manual


 
Daily Alarm 1 (Default
is 8:00am, OFF)
Daily Alarm 2 (Default
is 6:00am, OFF)
7
2. To set the alarm, press and hold the MODE/SET key for around 3 seconds and select which
alarm to set by pressing the ST/SP/+ or LAP/SAVE/- button.
3. Confirm the selected alarm by pressing the MODE/SET key and set the hour digits. To
increment the hour digits, press the ST/SP+ button and to decrement the hour digits,
press the LAT/SAVE/- button.
(Daily alarm icon will be turned on if the setting is changed)
4. Confirm by pressing the MODE/SET key and to increment the minute digits, press the
ST/SP/+ button and to decrement the minute digits, press the LAP/SAVE/- button
5. After so, turn ON/OFF the alarm by pressing the
ST/SP+ or LAP/SAVE/- button and confirm
by pressing MODE/SET key
ALARM OFF ALARM ON
6. To exit the daily alarm setting mode, press and hold the MODE/SET key for around 3 seconds
or wait for one minute when it will automatically exit the mode itself and return to the default
but previous settings will remain unchanged
Note:
- The alarm time will last for approximately 30 seconds and to switch off the alarm, press any keys
to switch off the alarm. If no buttons have been pressed for one minute when setting the daily
alarm mode, the previous setting will remain unchanged. Any changes must be confirmed by
exiting through holding MODE/SET key.
- If the unit is in sleep condition and the alarm is triggered, if alarm is stopped in regardless of
whether the user stops it or not, the unit will return to its energy saving mode.
Chronograph Mode:
1. Press the MODE/SET key until a screen which displays
chronograph appears
Daily Alarm:
1. Press the MODE/SET key until you have arrived
at the daily alarm setting and the display should
show ALARM 1 in the top section of the screen
and you can set up to two separate alarms.