Filter
Top Products
13
Note:
1. Press and holding the MODE/SET key will quit the mode immediately and go back to Lap/
Training Record Selection Mode.
2. In Memory recall mode, if there is no key press or key hold for 60s, it will return to Clock mode.
3. In Chronograph memory recall mode, if there is an error on reading the data, then an error
display is shown:
4. To delete any data records, exit this screen to return to
memory recall record selection by holding the MODE/SET
button for approximately 3 seconds
5. Then increment the laps, press the ST/SP/+ button and to
decrement the laps, press the LAP/SAVE/ - button to your
selected lap
6. Hold the EL/RESET key for around 3 seconds to delete and toggle
yes or no or all by pressing the LAP/SAVE/ - or ST/SP/+ button
7. Press MODE/SET key to confirm