Filter
Top Products
Owner’s Manual: Advanced Programming and Troubleshooting 48
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
• Select the units of measure
• Set the pause or cool-down times
• Determine the setting for the CrossRamp auto-leveling
feature
• View the odometer
• Display the number of hours you have used your EFX
• View the software versions and part numbers
• Check the usage log
• Check the error log
Advanced Programming Tips
• Always start at the Precor banner.
• The advanced programming and diagnostic mode is
accessed by pressing the RESET key at the Precor
banner. Any remaining key presses must occur quickly
and without pause.
• The QUICKSTART key is disabled while in advanced
programming mode.
• The number keypad is disabled once you enter advanced
programming mode. You need to use the navigational
arrow keys to change the blinking prompts.
• Some keys provide the same functionality and can be
used interchangeably while in advanced programming
mode. These keys are:
OK and ENTER
• The advanced programming prompts appear sequentially
and in a menu format. Pressing the arrow keys in the
navigational keypad moves you through the programs.
Press OK to choose or accept the displayed selection. To
return to the Precor banner without saving any changes,
press RESET.