Filter
Top Products
Owner’s Manual: Display Console 24
CROSSRAMP: Press and hold the CROSSRAMP
arrow keys to increase or decrease the ramp incline
from 1 to 20 on the EFX5.35 or 1 to 14 on the EFX5.33
and EFX5.31.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display.
Ramp changes occur only when the foot pedals are in
motion. The number that appears on the display
indicates the selected CrossRamp setting, not the
degree of incline. There is not a one-to-one relationship
between the degree of incline and the CrossRamp
setting.
The CrossRamp setting affects the column height in the
program profile. Refer to Diagram 12.
QUICKSTART: Press QUICKSTART to start your
workout immediately using the Manual Program. Refer
to Choosing QUICKSTART.
RESISTANCE: Press and hold the RESISTANCE
arrow keys to increase or decrease the resistance in
from 1 to 20.
Right Selection Key: Every time you press this key the
display reflects your cumulative strides, your strides per
minute, or your vertical gain. An LED lights and
indicates which information is being displayed.