Filter
Top Products
Owner’s Manual: Programs 43
Heart Rate Programs
The Basic HRC Program, available by pressing the HEART
RATE key, adjusts the CrossRamp to maintain your heart rate
within two beats per minute of the target heart rate while you
exercise. To use this program, you must enter your age and
wear a chest strap or grasp the touch-sensitive handrail
grips so your heart rate can be monitored throughout the
session.
Important: Consult your physician to determine the
appropriate target heart rate for your age and fitness level.
If your physician recommends a different target heart rate
than the one that appears on the display adjust it
accordingly. Do not exercise over the recommended range
of 85% of your maximum aerobic heart rate.
Heart Rate Program Tips
The Basic HRC Program enhances your overall
cardiovascular fitness level to help you achieve your weight
loss and fitness goals. Read through the following tips
before selecting a program. These tips provide general
information regarding how the program functions. For more
information and exercise suggestions, refer to the Precor
web site at www.precor.com.
• Each program provides a 3-minute warm-up period.
During this time, you may change the CrossRamp or
resistance, but you cannot adjust the time or change to a
distance or calorie goal. At the end of the warm-up
period, the program automatically controls the resistance.
Pressing the RESISTANCE arrow keys has no affect.
Note: When your target heart rate is achieved or the
3-minute period elapses, the warm-up period ends and
the program begins.
• The program sets the target heart rate as a percentage of
220 minus your age. Changing the target heart rate your
stride rate or CrossRamp affects the unit’s ability to
maintain your target heart rate in the preferred zone. It
takes time for the EFX to readjust the resistance so that
your heart rate remains on target. Check the SmartRate
and the HEART RATE displays to see if you are
maintaining your preferred zone and to determine your
actual heart rate. For information about understanding
your target heart rate, refer to Heart Rate Features.
• Changes to the CrossRamp are reflected in the
program’s profile. Automatic resistance changes appear
in the RESISTANCE display.
• To change the program, select a different PROGRAMS
key and press OK.
• A cool-down period is incorporated into the program.
HEART
RATE