Filter
Top Products
A 8 A 9
Easy Start
Installing the Polar Bike Mount
Use cable ties to secure the bike mount
securely on the rubber pad.
Attach the receiver by securing the wrist
strap.
Installing the Polar Speed Sensor™
The Polar Speed Sensor measures speed
and distance when cycling.
1. Check the front side of the front
fork to find a suitable place for the
speed sensor. The sensor should be
attached less than 1’8"/ 50 cm from
the mounted wrist receiver. The
smaller the distance the better.
Choose the right area on the fork and
clean and dry it thoroughly. Attach the
rubber pad over that area.
2. Place the sensor in the position as in
illustration 2. Then adjust the sensor
towards the wheel as much as possible.
3. Pass the cable ties through the
sensor holes and loosely adjust the
ties. Do not tighten fully yet.
If the cable ties are too short for
your bicycle, put two of them
together to make them longer.
How to Prepare the Wrist Receiver
1. Since the display is blank when the receiver leaves the
factory, you have to activate the wrist receiver by pressing
the OK button twice, after which the Time of Day display
appears. This is a one-off procedure; once you have turned
on your receiver you can not turn it off anymore.
2. You may start measuring your heart rate right away
using the default settings. However, the following
settings are ones that it would be useful to change as
soon as possible: Time of Day (see section Watch Settings)
and personal user settings (see section User Information
Settings).
3. For more information on the other functions, see section
Modes and their functions. You can either manually enter
the settings by pressing the receiver buttons or you can
define your settings Polar Precision Performance software,
after which the data should be transferred from your
computer to the wrist receiver.
4. Wear the wrist receiver as you would wear an ordinary
watch. If you go biking, we recommend attaching the
wrist receiver to a Polar Bike Mount™.
60°
Riding direction
max 1´8´´ /
50 cm
1
2
S720i manual USA A .pm6 12/2/02, 10:108-9