Filter
Top Products
C 53C 52
See the alternative phase displays from “Exercising with Interval Training
Set” section. You can also choose information to the three display rows.
You can configure the middle and upper rows either in the Measure
mode or during the exercise.
Select the Middle Row Information
1. Press the down button to select the desired display alternative. When
you swap the middle row information, the upper and lower rows change
also. Continue selecting the upper and lower rows.
Select the Upper Row Information
2. Press the up button to select from the following:
Time of Day (Time), stopwatch (Sw), lap time (Lp),
or if you have turned the functions on select from:
calorie expenditure (Cal), trip (Trip), current speed (Spd), average speed
(Avg speed), maximum speed (Max speed), cadence* (Cad), altitude
(Alt), output power* (Pwr), left right pedalling balance* (LRB), pedalling
index* (PI).
You cannot select the same displayed function to the upper and middle row
i. e. the option on the middle row is no longer available for the upper row.
*Optional Polar Cadence Sensor or
Polar Power Output Sensor required.
DaySwapping the Displayed Exercise Information
There are six display options, which you can swap between by pressing the
down button. Once you have configured the display options, the receiver
saves the settings. If the Help function is on, the name of the selected
function appears for a few seconds.
Stopwatch Time of Day
Time of Day Stopwatch
Current heart rate
Number of the lap
Stopwatch
Lap time Speed
Altitude Power*
Temperature
Remember to attach your receiver to the Polar Bike mount in
order to record the correct temperature.
Phase Name
Countdown
timer
When you have set your Interval
Training Set on, you will have one
extra display. You can only change the
middle and lower rows for this display.
S720i manual USA A .pm6 12/2/02, 10:1052-53