Polar SMARTEDGE Heart Rate Monitor User Manual


 
53
52
Limited Polar
Warranty
Polar Electro Oy warrants to the original consumer/
purchaser of this heart rate monitor that the product will be
free from defects in material or workmanship for one year
from the date of purchase. Please keep the receipt
which is your proof of purchase!
Warranty does not cover receiver battery, damage due to
misuse, abuse, accidents or negligence of the precautions;
improper maintenance, commercial use, cracked or broken
cases.
Warranty does not cover damage or consequential damage
caused by service not authorised by Polar Electro Oy.
During the warranty period the product will be either repaired
or replaced at an authorised service centre free of charge.
For more details, please see the warranty card.
Copyright © 1997
Polar Electro Oy, FIN-90440 KEMPELE, Finland
All rights reserved. No part of this manual may be used or reproduced in any
form or by any means without prior written permission of Polar Electro Oy.
Polar logotype, Polar Pacer and Polar Beat
are registered trademarks of Polar Electro Oy.
Polar Vantage NV, Polar XTrainer Plus, Polar Accurex Plus, Polar Protrainer XT,
Polar Protrainer NV, Polar Protrainer XT, Polar Advantage Interface,
Polar Precision Performance, Polar Interface Plus, Polar Training Advisor,
Polar SmartEdge, Polar Fitwatch, Polar Heartwatch and Polar Favor are
trademarks of Polar Electro Oy.
This CE marking shows compliance of this product with Directive 93/42/EEC.
SENDING INSTRUCTIONS
1. Pack the product carefully to avoid further damage.
2. Include all the parts of the Polar Heart Rate Monitor. A full
periodic check will be done on the whole product.
3. Include proof of purchase (a receipt or its photocopy) if the
product is under warranty.
4. Include a detailed description of the problem. Use the
return sheet of the Customer Care Charter!
5. Include your name, return address and daytime
telephone number.
6. Ship postage prepaid to your dealer or distributor. For
contact details see the Customer Care Charter or the
warranty card.
POLAR’S SERVICE PROCEDURE
Any service is recommended to be done by an authorised
Polar service personnel. Our standard test and check
procedure will be performed on all Polar Heart Rate Monitors.
The test includes the following elements:
POLAR TRANSMITTER
1. Visual inspection
2. Check of the transmission range
3. Check of electrode conductivity
4. Wash and clean if necessary
POLAR WRIST RECEIVER
1. Visual inspection
2. Check of battery voltage
3. Check and cleaning of case contacts
4. Re-assembly, including seal renewal if necessary
5. Water resistancy test
6. Operational test
Water resistance cannot be guaranteed after
unauthorised service.
0537