Filter
Top Products
STEP 21:
FIGURE 21
22
• Route the LOW CABLE (AN) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the PULLEY BRACKET (Z)
using one 3/8 X 1-3/4” BOLT (11) and one 3/8” LOCK NUT (19) as shown in FIGURE 21.
• Route the LOW CABLE (AN) throught the BASE PLATES (C) and assemble one 3-1/2” PULLEY (35) to the BASE PLATES (C)
using one 3/8 X 3-3/4” BOLT (6), two 15/16” SPACERS (24) and one 3/8” LOCK NUT (19). See FIGURE 21.
3/8 X 1-3/4” 11
6 3/8 X 3-3/4”
7
19
24
35
19
35
C
AN