Filter
Top Products
STEP 8:
• SECURELY assemble the PEC PLATE (O) to the BASE (B) using two 3/8 X 2-3/4” BOLTS (9), one 3/8 X 4” BOLT (5),
two 3/8” WASHERS (18) and three 3/8” LOCK NUTS (19) as shown in FIGURE 8.
FIGURE 8
11
• SECURELY assemble the LEFT (F) and RIGHT (G) PEC FLY ARMS to BASE (B) using two 1/2 X 3/4” BUTTON HEAD BOLTS (15)
as shown in FIGURE 8. (Note: Tighten this connection enough to remove excess play yet allow the PEC FLY ARMS to rotate freely.)
• Assemble the LEG PEDESTAL (K) to the FRAME (A) using two RH CAPS (32), one 1/2 X 104mm BOLT (2), two 1/2” SHIM
WASHERS (13), and one 1/2” LOCK NUT (20). (Note: Tighten this connection enough to remove excess play yet allow the LEG
PEDESTAL to rotate freely.)
• Assemble two ROLLER PADS (AJ) to the LEG PEDESTAL (K) using one 3/4 X 17-3/8” TUBE (T) four PLASTIC WASHERS (33)
two ROLLER PAD CAPS (30) and two 5/16 X 1” ALLEN SCREWS (38) as shown in FIGURE 9.
STEP 9:
FIGURE 9
9 3/8 X 2-3/4”
3/8 X 4” 5
1/2 X 3/4” 15
19
18
B
O
F
1/2 X 104mm 2
30
K
AJ
T
20
13
A
32
G
33
38
5/16 x 1”
ALLEN SCREW