Filter
Top Products
27
STEP 20:
FIGURE 20
• SECURELY assemble one SEAT PAD (16) to the BACK PAD ADJUSTMENT (71) using two 3/8 X 1-1/4” BOLTS (70) and two 3/8”
WASHERS (64).See FIGURE 20.
• Assemble two ROLLER PADS (17) to the LEG PEDESTAL (8) using one 3/4 X 18” TUBE (24) four PLASTIC WASHERS (45),
two 3/4” ROLLER PAD CAPS (44) and two 5/16 X 1” BUTTON HEAD ALLEN SCREWS (54 ).
• Assemble two ROLLER PADS (17) to the SEAT ADJUST (7) using one 3/4 X 18-3/8” TUBE (25), four PLASTIC WASHERS (45),
two 3/4” ROLLER PAD CAPS (44) and two 5/16 X 1” BUTTON HEAD ALLEN SCREWS (54 ).
• Assemble two ROLLER PADS (17) to the BACK PAD ADJUSTMENT (71) using one 3/4 X 21” TUBE (26), four PLASTIC
WASHERS (45), two 3/4” ROLLER PAD CAPS (44) and two 5/16 X 1” BUTTON HEAD ALLEN SCREWS (54).
STEP 27:
FIGURE 21
24
17
45
44
54
25
26
71
8
7
70
64
62
71
16
2
• SECURELY assemble the BACK PAD ADJUSTMENT (71) to the UPRIGHT (2) using one 1/2 X 5-3/4” BOLT (61) and one
1/2” LOW HEIGHT LOCK NUT (62).See FIGURE 20.
61
3/8 X 1-1/4”
1/2 X 5-3/4”