Filter
Top Products
FIGURE 1
11
• LOOSELY assemble two BASE PLATES (11) to the FRONT BASE (1) and the BASE CONNECTOR (3) using four 3/8 X 3-3/4” BOLTS
(57) and four 3/8” LOCK NUTS (63). See FIGURE 1.
2
63
4
11
57 3/8 X 3-3/4”
66
3/8 X 3”63
• LOOSELY assemble the FOOTPLATE (66) to the FRONT BASE (1) using one 3/8 X 3” BOLT (67) and one 3/8” LOCK NUT (63) as
shown in FIGURE 1.
STEP 1:
63
63
67
64
64
1
3
• LOOSELY assemble the UPRIGHT (2) to the FRONT BASE (1) using two 3/8 X 2-3/4 BOLTS (60) two 3/8” WASHERS (64) and
two 3/8” LOCK NUTS (63)
• LOOSELY assemble the REAR BASE (4) to the BASE CONNECTOR (3) using two 3/8 X 3-3/4 BOLTS (57) two 3/8” WASHERS (64)
and two 3/8” LOCK NUTS (63)
60
3/8 X 2-3/4”
57