Filter
Top Products
24
STEP 17:
FIGURE 17
• Assemble two 3-1/2” PULLEYS (37) to the BASE PLATES (11) using two 3/8 X 3-3/4” BOLTS (57), one 3/8 X 1” SPACER (51)
and two 3/8” LOCK NUTS (63). See FIGURE 17.(Note: Loop the ARM CABLE (31) around the PULLEYS prior to assembling the
PULLEYS. Leave a loop in the ARM CURL as shown!)
• Assemble one 3-1/2” PULLEY (37) to the GUIDE BRACKET (42) using one 3/8 X 1-3/4” BOLT (53) and one 3/8” LOCK NUT (63)
(Note: Loop the ARM CABLE (31) around the PULLEY prior to assembling the PULLEY BRACKET.)
63
37
51
31
53
3/8 X 3-3/4” 57
LOOP
CABLE
63
42
3/8 X 1-3/4”
37
11