Filter
Top Products
STEP 11:
FIGURE 11
42
37
29
51
3/8 X 4-1/4”
2
63
• Assemble one 3-1/2” PULLEY (37) to the BOOM PLATES (14 & 15) using one 3/8 X 4-1/4” BOLT (68), two 3/8” FLAT WASHERS (64)
two GUIDE CABLES (65), two 3/8 X 1” SPACERS (51) and one 3/8” LOCK NUT (63). See FIGURE 11.
(Note: Loop the WEIGHT STACK CABLE around the PULLEY prior to assembling to the BOOM PLATES.)
• Screw the short threaded end of the WEIGHT STACK CABLE (29) into the end of the GUIDE BRACKET (42) .See FIGURE 11.
68
64
SHORT CABLE
• Disassemble the SHORT CABLE and the TURN BUCKLE on the GUIDE CABLE (65) as shown in FIGURE 11. The SHORT CABLE
will be reassembled later.
19
TURN BUCKLE
65