Filter
Top Products
25
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
DETAIL 36
FIGURE 36
SEE DETAIL 36
STEP 36
• Securely assemble the ball end of the AB CABLE (91) and one 3-1/2” PULLEY (79) to the FRONT UPRIGHT (11) using two 3/8
X 2-3/4” BOLTS (38), two 3/8” FLANGE SPACERS (66), two 3/8” WASHERS (51), and two 3/8” LOCKNUTS (48). (NOTE:
The AB CABLE (91) should be routed underneath the retaing bolt as shown in DETAIL 36.)
FIGURE 37
STEP 37
11
3/8 X 2-3/4” 38
51
48
79
66
91
79
• Route threaded end of AB CABLE (91) around 3-1/2”
PULLEY (79) while assembling one 3-1/2” PUL-
LEY (79) to the lower FLOATING PULLEY
BRACKET (22) using one 3/8 X 1-3/4” BOLT (36)
and one 3/8” LOCKNUT (48) as shown in FIGURE
37.
91
22
48
3/8 X 1-3/4” 36