Filter
Top Products
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
23
FIGURE 33
FIGURE 32
90
23
STEP 32
• Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on LEVER STOP (12) as shown in FIGURE 32.
(NOTE: The bolt holding pulley and cable retaining clip may need to be loosened to align cable retaining clip with cable.)
• Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on PRESS ARM LEVER (9). (NOTE: The bolt
holding pulley and cable retaining clip may need to be loosened to align cable retaining clip with cable.)
STEP 33
• After routing ball end of LEG EXT. CABLE
(90) through SWIVEL PULLEY BRACKET
(23), attach two 3-1/2” PULLEYS (79) using
two 3/8” X 2” BOLTS (37) and two 3/8” LOCK-
NUTS (48). See FIGURE 33.
48
79
3/8 X 2” 37
90
9
12